Your car is washed, polished, and waxed. Your annual maintenance includes vacuuming it every weekend and taking it for the annual MOT. Nevertheless, what about wheels and rims? It’s critical to clean the alloy on your car’s wheels and rims because they’re the most likely parts to get dirty. Check out these simple steps for how to clean alloy wheels with WD40.

Alloy Wheels

Automobile wheels made of aluminum alloys or magnesium alloys are alloy wheels. In general, they are lighter for the same strength and provide better heat transfer, as well as a better aesthetic appearance. Magnesium alloys were used for the first light alloys.

In spite of their loss of popularity for common vehicles, they maintained some popularity through the 1960s. 

Aluminum casting refinement finally made it possible to make safe wheels in the mid to late 1960s. The aluminum wheel adapted to become a low-cost high-performance wheel after aluminum casting improvements once they became more widely adopted for motorsports.

WD-40

A special blend of lubricants makes WD-40 a solvent. “WD” refers to water displacement in WD-40. Furthermore, the 40 represents the 40th time the Rocket Chemical Company attempted to develop the product in 1953 in San Diego, California.

It took the company 40 tries to develop a formula that could prevent corrosion in the aerospace industry by dislodging water.

First used to protect the Atlas missile from corrosion and rust, it was then sneaked into lunchboxes to be used at home by company employees buy tiktok followers free. Rocket Chemical Company founder Norm Larsen thought ordinary people could use it in their homes, and later made it into an aerosol can for general use.

It was a rocket chemical company, the manufacturer of WD-40, that renamed itself after its flagship product WD-40 in 1969, and it went public in 1973. There were more than one million cans of WD-40 sold every week in 1993, and the product was in four out of five homes.

WD-40 FOR CLEANING ALLOY WHEELS

If you want to keep your car’s rims clean, it doesn’t matter if they are steel, alloy, or another material; they need to be cleaned weekly to remove the deposits. Here is a method is given below for cleaning wheels with WD-40.

Pre-washing

Using a pressure washer, you can clean the brake pads of mud, dust, and powder. Utilizing a spray bottle or brush, mix an effective car wash product with water and use it to clean the rim. Then spray again after it has soaked for some time. After that, use a brush to remove dirt.

Removal of stubborn dirt

Despite the pre-washing, dirt and debris will still remain on the surface like grease. There is a need to treat this dirt differently.

WD-40 can be applied after washing with detergent and rinsing off. Grease, oil, and dirt can be removed from surfaces with this formula without leaving residue behind.

The product works immediately on contact and can be rinsed off easily. However, the product should not be allowed to penetrate into brake pads. Applying it is best done by spraying it onto a cloth and then passing it over the rim and alloys.

Pass the treated parts over a clean towel after applying the product, ensuring that the product coats the entire rim surface, or repeat the process with another dose of detergent.

Uses of WD-40

• Keep dead bugs away 

Dragonfly would have slid right off the truck’s windshield and grill if some WD-40 had been sprayed on them.

WD-40 can be used to prevent bugs from sticking to your car, as well as to remove already stuck-on bugs, bird droppings, tree sap, and grime. Afterward, rinse with soap and water to avoid damaging your paint.

• Restore and clean license plates

WD-40 can be used to clean rusty, old license plates. It takes about 30 seconds to spray, wait, and wipe. After rinsing with soap, your license plate will be restored. 

• Remove Paint Rubs

A little WD-40 could be the solution if another car scuffed your paint after getting too close. WD-40 works effectively to remove small amounts of paint transfer, although it is not recommended for large areas. Restore the area’s original finish by washing it with soap and water.

• Lubricating and maintaining spark plugs

WD-40 keeps your car from starting when it’s wet or humid. Spark plugs and spark plug wires are kept dry by WD-40 since it removes carbon residue.

• Oil Cleanup

WD-40 will get rid of oil spots on your driveway, old oil cans, exhaust pipes, and even your hands if they’re dirty. Wash the area with soap and water after you have removed the oil with WD-40.

• Get rid of dirt, grime, and grease

Your car parts can be cleaned off even the toughest dirt, grease, and grime with the WD-40 Specialist Industrial-Strength Degreaser.

• Take off stickers, decals, bugs, and bird droppings

Use WD-40 to remove stickers, decals, or other materials from your car before using a knife or razor blade. Use a no-scratch scouring pad to clean the surface after spraying the cleaning solution on it. When you are finished, make sure to rinse your hands with soap and water.

• Avoid sticking mud

Off-roaders will know how hard it is to clean all that dirt and mud off their vehicles after they dry. Use WD-40 on your ATV, dirt bike, Jeep, or any other automobile to prevent mud from sticking in the first place.

• Keep nuts and bolts from breaking or rounding off

If your nuts or bolts are rusted or stuck, spray them with WD-40 Rust Release Penetrant. For good measure, spray a second time after a couple of minutes. The bolt will not strip or damage the threads of the fastener as it is removed.

• Guard weather-stripping

Maintain the pliability of your door gaskets, weather-stripping, and windshield wipers by spraying WD-40 on them. It’s also possible to use WD-40 to unstick car windows and doors during cold weather.

• Cleaning and polishing tire sidewalls

You can use WD-40 on your tires’ sidewalls to help clean them.

Conclusion 

When you are buying a car, it is very important to clean it to make sure its maintenance and longevity. Especially when it comes to a car having alloy wheels, you should have to pay more attention to its cleaning.

Here a method given to clean the wheels from dirt, grease, and oil is WD-40. You can clean your wheels through it to maintain its longevity. Here are some other uses of WD-40 are described.